Pressure Washer Parts and Equipment in Lloydminster
Relay Distributing’s Team of Service Personnel has over 50 years of combined experience in the pressure wash industry. Not only do we custom design the highest quality equipment around, we also provide service and maintenance and stock a complete selection of parts and accessories for all the top brands of pressure washer equipment. Give us a call or visit our store in Lloydminster to see how we can look after all your industrial cleaning needs.
Custom High-Pressure Wash Systems
Our wash packages are designed with only the top quality components. The true nature of the design is to exhibit the best possible value for your dollar. Terms such as: weatherproof, stainless steel, aluminum, custom-built, and installation-included are rarely even mentioned by our competitors. We strive for long-term relationships; and by providing long lasting, high performance equipment and unmatched service, we hope to ensure just that.
Features of our wash systems:
Custom-built heavy gauge aluminum stands.
No paint that will peel and no steel that will rust.
Stainless steel suction screens and water shut off valves.
Hydrominder proportioners for fail-safe diluting of products.
Equipped with a top-notch float valve.
Industry leading brands from all over the world, like the Italian General Pumps, or the Japanese Cat Pumps, we custom build with only the best.
Our custom “quick oil change” assembly enables our customers to perform their own maintenance, in a quick and clean manner .
A high-temperature relief valve to limit damage due to overheating.
Low-voltage transformer, disconnect switch and indicator light.
Constructed of fibreglass.
An hour meter to monitor pump run time for easy scheduling of maintenance.
Electronic pilot ignition and safety controls.
Stainless steel outer jacket.
Draft diverter.
24-volt safe control of soap, rinse and heat.
Includes cable and terminations.
Guarantees proper lighting of the heater burner assembly.
Ensures that no pilot outage nuisances can occur.
The system will shut down automatically after a pre-set time, when not being used.
Automatically closes after the wash system is shut down.
Reduces the risk of freezing the heater coil and eliminates potential downdrafts.
It consists of hydro minder chemical proportioner and stainless steel blending tank for fail-safe diluting of wax or soap.
Foam systems with or without the use of compressed air. The best quality manufacturers available.
Ensure that the wash system shuts down after 30-60 minutes use.
Also enables bypassing the coin boxes in a commercial wash.
It helps in reducing operator fatigue.
Reduces noise level and wear and tear by reducing vibration.
This unit runs automatically when the heater is in use to “power” vent the burner.
It is used when venting through the wall is preferred rather than through the ceiling.
Scheduled to cater to your needs and minimize costly downtime.
This unique suspension system is used to keep your hose off the floor where most wear and damage occurs.
Keeps hoses off the floor
Canadian Made!
Fully serviceable.
Easy Pay Premium Payment Station:
Features a stand-alone payment module
Accepts credit cards, Interac/debit, gift/fleet cards, mobile payments and key fobs
No internet or communication cable required
Operates off cellular data
Counts up – open transaction (no more beat the clock!)
Double your revenue
Electronic receipt
Web-based reporting
Low transaction fees
Led display times
Your carwash logo on the face plate
Water-resistant stainless steel housing
Available with 12 position rotary switch or touch screen
Mobile Wash Equipment
At Relay Distributing, we pride ourselves in providing only the highest quality portable pressure washers available. Assembled in Canada with only the best possible components. The machines we deal with, are built to last, and our service department has all the most common wear and tear parts to keep your machine in service.
We have the equipment, accessories, and products for every type of pressure wash owner. Whether you use it a couple of times a year, or every day. From Oilfield and Agriculture to the casual residential washer, we have something for everyone.
Stop in at our location in Lloydminster to meet the friendly and knowledgable staff of Relay Distributing, to see which pressure washer meets your needs. Or come in with your ideas and let us help you build a custom unit to suit your needs.
Proud Dealer, Service Centre and Warranty Depot of the Following Canadian Wash Equipment Manufactures:
The below models are in stock. Feel free to contact us for a different model to meet your needs or visit the manufacturers website to browse other available models
With a rugged frame and stainless steel top wrap this unit is durable,
The 13″ flat free tires, make it very easy to maneuver.
The control panel is strategically located, allowing you to easily adjust the thermostat and view the hour meter.
Hot Water Electric Pressure Washer
Rated to 3.5gpm @ 2000psi
5 HP 230V 1Ph 25 amp WEG Motor
Stainless Steel Top Wrap that allows access to the coil within minutes
Burner is protected by a cover and mounted on the end for easy access
Redesigned Frame with added Sliding Power Platform to make servicing easier
Standard Hour Meter with Adjustable Thermostat
Convenient Control Panel in water-resistant electrical enclosure
Flat-Free Tires and safety brake
Hot Water Electric Pressure Washer
5hp 230v 1Ph tech top motor
Direc Drive Interpump / General Pump
Hot Water Gas Pressure Washer
Rated to 3.5 GPM @ 4000 PSI
13HP Electric Start Honda GX390 Engine
Direct Drive Interpump / General Pump
Hot Water Gas Pressure Washer
Rated to 3.5 GPM @ 4000 PSI
14HP Electric Start Kohler CH440 Engine
Direct Drive Easy Kleen pump
Hot Water Electric Pressure Washer
5hp 230 V 1PH 30 A electric motor
Direct Drive Interpump/General Triplex Pump
1000 psi, 2.1 gpm
Steel frame and rugged powder-coated
115V Baldor electric motor
General pump/interpump triplex with ceramic plungers
Adjustable pressure regulator
High pressure hose 30’
36” Wand
Adjustable detergent injection
Four nozzles (0⁰, 15⁰, 25⁰, and soap)
2500 psi, 3 gpm
Steel frame and rugged powder-coated
220V Baldor electric motor
General pump/Interpump triplex
Adjustable pressure regulator
30’ High pressure hose
36” Wand
Adjustable detergent injection
Four nozzles (0⁰, 15⁰, 25⁰, and soap)
2500 psi, 3 gpm
Steel frame and rugged powder-coated
6.5hp Honda GX engine with oil alert
General pump/Interpump triplex
Adjustable pressure regulator
30’ High pressure hose
36” Wand
Adjustable detergent injection
Four nozzles (0⁰, 15⁰, 25⁰, and soap)
3500 psi, 4 gpm
13hp Honda GX engine with oil alert
General pump/Interpump triplex
Adjustable pressure regulator
50’ High pressure hose
36” Wand
Adjustable detergent injection
Four nozzles (0⁰, 15⁰, 25⁰, and soap)
Powerease engines are cost effective and designed to be reliable.
Direct drive system connects the engine to the pump for a compact and efficient power transfer.
Maintenance-free axial pump includes a built-in soap injector and delivers excellent performance.
Powder-coated steel frame with storage for accessories, and 11” flat-free tires easily handle going over rough terrain.
Electric motor is rated at 1.5 HP, quiet running, and can be safely used indoors.
Triplex pump with forged brass manifold, ceramic coated pistons, built-in soap injector and thermal valve.
Built-In unloader effectively regulates water flow in a compact design.
Accessories include a high-pressure hose and spray gun wand assembly with a variable nozzle so that it can be used right out of the box.
Lightweight hand-carry model allows it to be easily repositioned around the workspace. Rubber anti-vibration pads keep it secure once placed.
Versatile electric pressure with an innovative design so it can be on a mobile cart, wall mount, or hand-carried depending on what best suits the situation.
Electric motor is rated at 1.3 HP and has a total start system that automatically shuts off the pressure washer when the trigger is released to prolong the life of the pump.
Equipped with a GFCI plug that greatly reduces the risk of electric shock.
Maintenance-free axial pump with an onboard soap system delivers excellent performance.
Accessories include a spray gun with quick connect fittings, a 20’ high-pressure hose, and four spray nozzles.
Unique frame switches from a wheeled cart, to hand-carried, and can be mounted to a wall with an optional hanger kit.
The body is enclosed in a plastic shell that protects the internals, helps dampen the sound and includes integrated storage slots for all the accessories.
Previously stocked and special order machines.
Honda GX390 engine
Powder coated steel frame - protects components while allowing for easy access to use and maintain
13" flat-free tires for stability and rough terrain
Built in lift point for convenient loading and unloading
Mounting brackets included for quick installation onto trucks or trailers by removing the wheels
- 50' high pressure hose
-spray gun wand assembly
-five spray nozzles
3500 psi, 3.8 gpm
Downstream adjustable chemical injector: For low-pressure soap and chemical injection.
Quick connect hose connectors: For easy on/off connections and tangle free hoses.
Stainless steel coil skin: It is a durable rust resistant skin. Schedule 80 heating coil and 300,000 BTU burner.
Four quick connect nozzles: Colour-coded nozzles included are 0°, 15°, 25°, and Soap.
High quality Italian easy pull gun and 48" lance
50′ high-pressure hose: Durable non-marking steel braided hose.
Separate unloader with easy start valve: Easily adjustable pressure control knob.
Heavy-duty steel frame with protective roll cage and a powder coated finish.
Large thermostat dial to adjust water temperature with ease.
Replaceable fuse for electronic overload protection.
High-quality triplex pump: All Dynablast pressure washers use GP/Interpump pumps with 5-year warranty.
Easy access control panel, makes servicing your machine fast and easy.
13″ solid tires, no more flat tires.
Large fuel oil tank, holds 4.4 gallons of No.1 or 2 Fuel Oil. Also includes a fuel indicator gauge.
Dynablast hot water washer
7.5hp 230 V electric motor
3000 PSI @ 3.8 GPM Interpump Triplex Pump
Cool-Bypass* technology limits temperature in the pump during periods of inactivity, prolonging the equipment life.
Snap ‘N Go kits allow easy upgrades to time delay shutdown, wireless remote operation, or auto start-stop.
This industrial series includes our large frame LT Pump affixed to our proprietary Tru-Trac belt tension system, and an oversized 10-gallon diesel fuel capacity allows for big jobs and long run time.
The integrated float tank and metering valve allows for the easy introduction of detergents when needed. Whether cleaning hog barns, oilfield and farm equipment, or fleet vehicles, the PHW series is built to deliver top quality results.
Karcher hot water washer
Electric start Honda motor
3500 PSI @ 3.5 GPM Karcher pump
5.0 hp Baldor motor delivers energy efficiency and reliability suited for commercial applications.
Direct drive system connects the engine to the pump for a compact and efficient power transfer.
Commercial grade Italian made General triplex pump featuring die-cast body with improved heat dissipation, forged brass manifold, and solid ceramic plungers.
The external unloader provides enhanced cooling, and is easy and cost effective to service in the future.
The thermal releif valve allows use of hot/warm water without concern of overheating the pump
Rugged Kohler engine reliably drives the pump with power to spare. Designed to be used all day, every day.
Direct drive system connects the engine to the pump for a compact and efficient power transfer.
Commercial grade Italian made General triplex pump featuring die-cast body with improved heat dissipation, forged brass manifold, and solid ceramic plungers.
The external unloader provides enhanced cooling, and is easy and cost effective to service in the future.
The thermal relief valve allows use of hot/warm water without concern of overheating the pump
Commercial Honda engine with excellent weight to power ratio. Designed to be used all day, every day.
Direct drive system connects the engine to the pump for a compact and efficient power transfer.
Commercial grade Italian made General triplex pump featuring die-cast body with improved heat dissipation, forged brass manifold, and solid ceramic plungers.
The external unloader provides enhanced cooling, and is easy and cost effective to service in the future.
The thermal releif valve allows use of hot/warm water without concern of overheating the pump
Rugged Kohler engine reliably drives the pump with power to spare. Designed to be used all day, every day.
Direct drive system connects the engine to the pump for a compact and efficient power transfer.
Commercial grade Italian made General triplex pump featuring die-cast body with improved heat dissipation, forged brass manifold, and solid ceramic plungers.
The external unloader provides enhanced cooling, and is easy and cost effective to service in the future.
Hose Reels
Keep your washbay area or mobile unit neat and tidy with one of our many hose reels. Avoid your hoses getting dirty, broken, or being tripped over. We carry all of the related parts and can also provide you with a custom set-up to fit your specific needs.
Rugged stainless steel withstands years of use and will not rust.
Sturdy 12 gauge base can be easily wall or floor mounted.
High pressure brass swivel rated to 3000 PSI.
Inventory number: PTHSMR100SS
Black steel for a clean sleek look.
High pressure swivel rated to 4000 PSI.
Sizes: 50', 100', 150' or 200' of 3/8" hose.
Manual rewind crank.
Locking mechanism to hold reel in place.
Inventory number: PTHSHR100
Wash Bay Products
We provide top-notch accessories and chemical products to get back that sparkle and shine. We stock a complete
selection of productsfor all your washbay needs. Not only do we offer the highest quality product, but we are also
proud to say that the vast majority of them are Made in Canada!
Take a look below at some of our most popular stock items. Dont hesitate to call us, we have countless other products,
and custom chemical blending available.
A concentrated liquid pressure wash soap for use with hot or cold water. It is very high foaming and has a light rose scent. It contains solvents, emulsifiers and detergents for degreasing and loosening heavy soil deposits. Safe to use on all painted surfaces, metal, plastic, concrete and wood. Safe to use around vegetation. Won't harm anything when used as directed. Very common in wash bays, on the farm, and right at home.
4L | Inventory number: CWPGTF4X4
20L | Inventory number: CWPGTF20
205L | Inventory number: CWPGTF205
Dilutes from 40:1 down to 80:1
Brushless
One of our most popular and wide spread products. Breakaway is a super concentrated, industrial strength cleaner and degreaser. It will melt away all sorts of grease. It can dissolve heavy soot deposits and it makes old baked on bug gut stains disappear. At lower dilutions it can be used for much lighter tasks as well. Breakaway is a custom designed product exclusive to Relay Distributing in Lloydminster. Stop in and pickup a jug to try it for yourself. You'll love this all around amazing product.
4L | Inventory number: DEPGB4
20L | Inventory number: DEPGB20
205L | Inventory number: DEPGB205
A highly concentrated polish and surface protection compound with the added benefit of carnauba wax for enhanced shine, rust inhibition and water repellency.
4 L | Inventory number: CWPGAUS4
20 L | Inventory number: CWPGAUS20
Diluted to 350:1
This wash product has been recently improved to hold its spot at the head of the pack. With our testing and product comparisons, we are sure that Hurricane will give you the results that you are looking for every time.
This wash powder is a highly concentrated, powdered vehicle wash that is effective at removing baked on road scum, and is also safe for all painted and unpainted surfaces. It performs well in hard water conditions, while it can also be used in both cold and hot water applications. A very high foamer for guaranteed customer satisfaction and does not leave behind costly build up in pumps or heater coils.
Free on loan mixing barrels will be provided by us for use of this product at your location.
20kg | Inventory number: CWMUF01797
50kg | Inventory number: CWMUF01798
181kg | Inventory number: CWMUF01799
Give your vehicles a new look with our car/truck wash products and equipment in Lloydminster. With over 30 years of experience, we aim at providing innovative, customer-driven solutions. We work closely with our suppliers and manufacturers to constantly improve and stay on top of the ever changing industry. Our high quality products and equipment keep your vehicles looking their best.
Foamer Systems
At Relay Distributing in Lloydminster, Foam is always a topic of conversation. We know that foaming our soap provides the best results in the fastest time frame, while minimizing waste. As our mission statement says, our goal is to provide our customers with the best possible value for their dollar. We stock the most common types of foamers, but what we sell is only the highest quality options on the market. Our custom systems take your wash to the next level of performance and efficiency!
High Pressure Spray Foam System (Bottle Style)
Consisting of a high-pressure, one-piece foam injector and nozzle, with either a 64 or 32oz bottle. This system has adjustable concentration for use with various types of chemicals for different applications. The bottle/foamer is quickly coupled to the wash gun while foaming and replaced with the regular wand for rinsing.
High Pressure Spray Foam System (Quick-coupled)
Consisting of a stainless-steel high-pressure foam injector, along with orifices to tune the injector to match the specs of the pump, the foam nozzle with coupler, and pick-up line assembly. The foam injector is installed at the pump, only the foam nozzle is coupled to the spray wand and then replaced with the regular spray tip for rinsing, producing the same foam output as the dual lance.
High Pressure Spray Foam System (Dual Lance)
Consisting of a stainless-steel high-pressure foam injector, foam nozzle, dual lance and pick-up line assembly. The foam injector is installed at the pump, switching from foam to rinse is made easy by a simple twist of the valve built into the handle of the dual lance.
High Pressure Spray Foam Injector with By-Pass
For use when maximum pressure is required for power rinsing. The bypass replaces the stainless-steel injector in either the quick coupled, or the dual lance foamer options.
Chemical Dispensing Systems
We custom design and stock various types of systems for all sorts of products and different applications. From acids and heavy crude degreasers, to janitorial products, we have designed systems to provide solutions for all chemicals requirements.
Pressurized Chemical Sprayer
This custom-built chemical sprayer has all the good stuff, including forged brass fittings, Viton seals, a pressure relief valve rated for 115 psi and an industrial wand/hose. Fill, pressurize with your compressor and spray. Easy!
Parts Lookup
This is just a preview/summary of some of the things we deal with everyday. Give us a call about anything pressure wash/steamer related.
